Air Entrainment Meter for Mortar
The SCTCM-0066 Air Entrainment Meter for Mortar is used for determining the air content of cement paste, cement mortar and lime mortar. The air entrainment meter is manufactured from cast aluminum, the upper part and the lower test pot are held together with an air-tight seal which are easily adjusted by using the two spring clamps. The pressure gauge is installed in the head of the meter and the scale works in the 0-20 volumetric % range. The air is compressed with a hand pump installed in the system and the smart configuration of the test and correction buttons enables fast and simple testing
Apparatus For Reactivity of Quicklime
The SCTCM-0068 Reactivity of Quicklime Apparatus is used to determine the reactivity of ground quicklime on slaking. The Apparatus consists of a Dewar Flask of 1 liter capacity, thermometer, electric stirrer, base stand and the related accessories.
AUTOMATIC CEMENT COMPRESSION & FELXURAL MACHINES
The SCITECH Automatic range of single testing chamber and double
testing chamber compression and flexure testing machines have been designed for reliable and
consistent testing of mortar samples. These compression and flexure testers are the results of
continuous applications and research studies to upgrade the machines with the latest technologies
and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and
BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by
using suitable accessories. These machines also meet the requirements of CE norms for safety and
health of the operator.
Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety
doors (should be factory installed) should be ordered separately.
The SCITECH automatic cement compression and flexure testing machines allow less experienced
operators to perform the tests. Once the machine has been switched on and the specimen is
positioned and centered by the help of centering apparatus. The only required operations are;
• Setting test parameters, including pace rate (only required when the specimen type is changed.)
• Choosing the compression or flexure frame by using the changeover valve.
• Pressing the START button on the control unit.
• The machine automatically starts the rapid approach; switches the test speed after 1% of the load
capacity of the machine and stops once the specimen failure.
• Automatically saves the test parameters and test results.
The SCITECH automatic cement compression and flexure testing machines consist of very rigid two
column single or double chamber frames, automatic hydraulic power pack with data acquisition and
control system BC 100.
Automatic Programmable Mortar
The mixer has been designed to mix mortars and cement pastes primarily to the requirements of
standards. The mixing paddle has a planetary motion and is driven by a motor with a microprocessor
based speed and preset programs to meet all listed EN and ASTM standards, custom designed
programs or manual mode. The mode button is used for the fast selection of different programs. The
mixing paddle revolves at a rate of 140 rpm. with a planetary motion of 62 rpm. in low speed. In high
speed, the paddle revolves at the rate of 285 rpm. with a planetary motion of 125 rpm. An automatic
sand dispenser is supplied with the machine and the sand is automatically discharged. Custom design
allows 6 programs to be set by the operator, where the motor speed, sand dispenser position and
duration of the mix can be set. For the mix where the motor speed is selected as zero, the bowl can
be lowered without interrupting the rest of the program. On the display the user can see the mix
time and the machine is equipped with lamp in order to warn the user for critical time periods.
Automatic Vicat Apparatus
The setting time determination of cement/mortar/gypsum is one of the most important parameter
for the quality inspection and verification. The machine is based on the innovative CVI-TECH
philosophy. On the machine, a needle (or a probe) drops freely into a cement sample at regular
intervals and in fixed positions. Penetration depth is measured by a sensor with 0,1 mm resolution.
Along with hardening process development the penetration depth decreases, when it matches some
thresholds pre-defined by Standards initial and final setting times are measured and recorded.
Blaine Air Permeability Apparatus
The SCTCM-0040 Blaine Air Permeability Apparatus is used
to determine the fineness of Portland cement, limes and
similar powders expressed in terms of their specific surface.
The apparatus is supplied complete with a U manometer
tube, manometer liquid, glass connection parts, test stand,
rubber aspirator, cell with perforated disc and plunger,
plastic funnel and 100 pieces of filter paper
Bulk Density Apparatus
The bulk density of lime is of interest for storage and packaging and
for determining volume and capacity of mixing equipment necessary
for processing the material.
The SCTCM-0069 Bulk Density Apparatus is designed to determine
bulk density by allowing a sample to fall from a known height into a
CEMENT COMPRESSION & FLEXURAL FRAMES
The SCTCM-6700 and SCTCM-6710, very rigid two column frames have been designed for
compression and/or flexure testing of mortar prisms and cubes specimens. Load cells are used on
both frames to provide high accuracy in load measuring. Both frames are fitted with round platens
with 165 mm diameter and these should be used together with suitable flexure and compression
Distance pieces and transparent front-rear safety doors (should be factory insttalled ) should be
Cement Flow Table ASTM
There are two models of the Cement Flow Table, the
SCTCM- 0060/A conforming to ASTM and the SCTCM-
0060/E conforming to the EN standard. Both are used
for determining the consistency of mortar, lime and
cement specimens. Manual and motorized models are
CEN Standard Sand
CEN Standard Sand, 1350 g
The SCTCM-0100 Curing Cabinet is used for curing of cement, concrete cubes or other mortar
specimens. It can be used for curing cement specimens within the mould, or after removing from the
mould. The curing cabinet provides 20 ± 1°C temp. and over 95% RH humidity for cement specimens.
Internal chamber and racks are made of stainless steel. The temperature is maintained at 20 ± 1°C by
a immersion heater and refrigerator unit which are supplied complete with cabinet. The cabinet is
equipped with a digital control unit which controls and monitors the temperature.
The humidity is maintained from 95% to saturation by water nebulizers and is also monitored on the
digital control unit.
Flow Cone Appratus
SCTCM-0071 Flow Cone Apparatus is used for determining the flow properties of grouts, mortars, muds and other fluid materials.
- Strength of Material
- Process Control Engineering
- Telecom Trainers
- Refregeneration Engineering
- Other Trainers
- Boilers & SteamGens
- CNC Trainers
- Electronic Trainer
- Environmental Trainers
- Fluid Mechanics
- uP Trainers
- Civil Engineering Products
- About Us
- Contact Us