• You've just added this product to the cart:

    Accelerated Curing Tank

    Accelerated Curing Tank

    SCTC-0980 Accelerated Curing Tank is designed for curing
    concrete specimens according to ASTM C1768 (Procedure
    A – Warm Water Method) and BS 1881: Part 112 (35°C
    Method and 55°C Method).

    The Tank consists of an insulated rectangular double walled metal chamber inside lined with stainless
    steel outer powder coated, an insulated lid with lifting handle to cover the chamber and an stainless
    steel perforated platform for circulation of water and to support the concrete specimes. The tank
    also has a circulation pomp. to provide the same water temperature at any point within the tank.

  • You've just added this product to the cart:

    Advanced Servo Controlled

    Advanced Servo Controlled

    The SCTC-4850 and SCTC-4860 Automatic Power Packs with Proportional Valve, are advanced power
    packs can be used on any testing system ideal for R&D laboratories and Universities for advanced
    tests with P.I.D. Closed loop control. It can perform tests under load, displacement and strain
    controls. The frequency of the P.I.D controller and data acquisition is 1000 Hz. SCTC 4850 and 4860 Automatic Power Packs are designed to supply the required oil to the load frames for loading,
    unloading or low cycle dynamic testing. All the operations of Data Acquisition and Controls System
    can be controlled from the touch screen front panel of a 240×320 LCD display or computer.

  • You've just added this product to the cart:

    Advanced Servo Controlled Automatic Power Pack with Servo Valve

    Advanced Servo Controlled Automatic Power Pack with Servo Valve

    The SCTC-4870 and SCTC-4880 Automatic Power Packs with Servo Valve, are advanced power packs
    can be used on any testing system ideal for R&D laboratories and Universities for advanced tests with
    P.I.D. Closed loop control. It can perform tests under load, displacement and strain controls. The
    frequency of the P.I.D controller and data acquisition is 1000 Hz. 4870 and SCTC-4880 Automatic Power
    Packs are designed to supply the required oil to the load frames for loading, unloading or low cycle
    dynamic testing. All the operations of Data Acquisition and Controls System can be controlled from the touch screen front panel of a 240×320 LCD display or computer.

  • You've just added this product to the cart:

    ADVANCED TESTING SYSTEMS

    ADVANCED TESTING SYSTEMS

    SCITECH Advanced Testing Systems has been designed to examine the mechanical properties of
    building materials that require advanced test setups and data acquisition systems. SCITECH Advanced
    Testing systems are ideal systems that can be used by research centers, R&D laboratories and
    Universities. Those Systems are modular systems that can be build according to the customer requirements and needs. SCITECH advanced testing system is user friendly equipment that allow user
    to rapid test setup and execution.

  • You've just added this product to the cart:

    Air Entrainment Meter

    Air Entrainment Meter

    The SCTC-0650 Air Entrainment Meter is used to determine the air content of fresh concrete. It
    consists of a flanged 7 liter capacity cylindrical vessel and cover assembly incorporating a large (90 mm dia.) pressure gauge, air pump and valves. It has a quick action clamping system. Direct pressure
    gauge reading to the nearest 0.1% up to 6% and 0.2% from 6 to 10%. It is not affected by changes in
    barometric pressure.
    The meter measures up to 22% of entrained air. It is appropriate for aggregates size of maximum 63
    mm.

  • You've just added this product to the cart:

    Automatic Compression Testing Machine

    Automatic Compression Testing Machine

    SCITECH Automatic range of 2000 kN and 3000 kN capacity com-pression testing machines have been
    designed for reliable and consistent testing of a wide range of specimens. These compression testers
    are the results of continu-ous research to upgrade the testing machines with the latest technologies
    to conform to the latest standards EN 12390-3, 12390- 4, BS 1881 and ASTM C39 in terms of its
    technical properties taking into account client requirements. These also meet the requirements of CE
    norms for the safety and health of the operator.
    Tests can be performed by either on SCBC 100 Unit or on a computer with using free SCITECH
    Software. The advantages of performing tests on computer with using SCITECH Software, such as
    reporting, graphical output, etc., can be seen at pages 155 and 156.

  • You've just added this product to the cart:

    Automatic Compression Testing Machine

    Automatic Compression Testing Machine

    Data Acquisition & PC Software
    The Automatic Compression Testing Machine can be controlled (Start, Stop commands) by a
    computer with the software (given free of charge by SCITECH). This software provides data
    acquisition and management for compression, flexure and splitting tensile test throughout the test
    execution. The advanced functions for data base management provide an easy navigation of all saved
    data. The test results certificate includes all descriptive information. Therefore, test parameters can
    be set and details about the test carried out such as client details, test type, specimen type, user info
    and other information required can be entered and printed out as well as test report and graph.

  • You've just added this product to the cart:

    Automatic Flexural Testing Machine

    Automatic Flexural Testing Machine

    The SCITECH Automatic range of 200 kN, 300 kN and 600 kN capacity flexure testing machines have
    been designed for reliable and consist-ent testing of flexural test on standard concrete beams,
    concrete or natural stone kerbs, concrete paving flags, and natural stone slabs and tensile splitting
    test of concrete paving blocks. These flexure testing machines are the result of con-tinuous research
    to upgrade the testing machines with latest technologies to conform to the latest standards EN
    12390-5, EN 12390- 6, EN 1338, EN 1340, BS 1881, ASTM C78, C293 and C496 in terms of its technical
    properties taking into account client requirements. These also meet the requirements of CE norms
    for health and safety of the opera-tor. Tests can be performed by either on SCBC 100 Unit or on a computer with using free SCITECH Software. The advantages of performing tests on computer with using SCITECH Software, such as reporting, graphical output, etc. The SCITECH Automatic range of 200 kN, 300 kN and 600 kN capac-ity flexure testing machines allow inexperienced to perform the test. Once the machine is switched on and specimen is placed, then the only required operations are; Setting test parameters, including pace rate only required when the specimen type is changed. Pressing the START button on the control unit. The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
    Automatically saves the test parameters and test results. The SCITECH ranges of Flexural Machines have the accuracy of Class 1 start-ing from 2% of the full capacity. The flexure testing machines are consists of heavy duty welded frame, automatic hydraulic power pack with data acquisition and control sys-tem SCBC 100. Please see page 135 and 136 for properties of SCBC 100 Unit.

  • You've just added this product to the cart:

    Automatic Four Column Compression Testing Machine

    Automatic Four Column Compression Testing Machine

    The Automatic range of 2000 kN, 3000 kN, 4000 kN and 5000 kN capacity four column compression
    testing machines have been designed for reliable and consistent testing of a wide range of specimens.
    These compression testers are the results of continuous research to upgrade the testing machines with
    the latest tech-nologies and conform to the latest standards EN 12390-3, 12390- 4, BS 1881 and ASTM
    C39 in terms of its technical properties taking into account client requirements. These also meet the
    requirements of CE norms for health and safety of the operator.
    Testing machines are supplied with EN compression platens as standard. Machines also comply with the
    ASTM C39 standard when used together with suitable platens.
    Tests can be performed by either on Touchscreen Unit or on a computer with using free testing
    software. The advantages of performing tests on computer with using testing software, such as
    reporting, graphical output, etc.
    The Automatic range of 2000 kN, 3000 kN, 4000 kN and 5000 kN capacity four column compression
    testing machines allow inexperienced operators to perform the tests. Once the machine has been
    switched on and the specimen is positioned and centered by the help of centering apparatus. The only
    required operations are:
    Setting test parameters, including pace rate (only required when the specimen type is changed).
    Pressing the START button on the control unit
    The machine automatically starts the rapid approach, when the specimen touches the upper
    platen the rapid approach is ended and starts loading at the pace rate that selected by user and
    stops once the specimen fails.
    Automatically saves the test parameters and test results

  • You've just added this product to the cart:

    Automatic Grinding Machine

    Automatic Grinding Machine

    The SCTC-1040 Automatic Grinding Machine provides fast grinding of
    cylinder specimen ends to obtain plane and parallel surfaces
    according to EN and ASTM standards.
    Three units of Ø38 to 100 mm or two units of Ø150-160 mm concrete
    cylinders ends can be ground simultaneously with the suitable cradle
    and water restraint panel. The length of the any specimen must be
    longer than 70 mm.
    According to ASTM and EN standards, the planeness accuracy of
    grinded surface is 0.05 mm. and the deviation of perpendicularity of the side with reference to the
    end faces is 0,5 O .

  • You've just added this product to the cart:

    Automatic Hydraulic Power Pack

    Automatic Hydraulic Power Pack

    The SCTC-4830 Automatic Hydraulic Power Pack, dual stage, controlled by SCBC 100 is designed to
    supply the required oil to the load frames for loading. The power pack is very silent, even at full load
    and can load the specimen between 1 kN/sec. to 20 kN/sec, with an accuracy of ±5%. A rapid
    approach pump is supplied as standard. A safety valve (maximum pressure valve) is used to avoid
    machine overloading.
    The SCTC-4840 Automatic Hydraulic Power Pack, dual stage, controlled by SCBC 100 has the same
    specifications with SCTC-4830 except for high oil capacity. SCTC-4840 is used on frames that have
    bigger pistons. Maximum working pressure of the system is 430 bar.

  • You've just added this product to the cart:

    Bartracker Concrete Covermeter

    Bartracker Concrete Covermeter

    SCTC-3000 Bartracker Concrete Covermeter is used
    to measure the thickness of concrete cover over
    steel reinforcement bars and metal pipes,
    furthermore it is also used to identify the location,
    orientation and diameter of reinforcement bars
    (rebar). The basic unit can be completed with a
    number of optional probes for various
    determinations.
    SCTC-3000 which uses the Pulse induction technique features a rugged waterproof IP 65 case with
    probe storage for easy portability. The battery pack can be recharged inside or outside the gauge.
    The display screen shows you everything you need to know.
    SCTC-3000 Bartracker Concrete Covermeter is supplied complete with; Main unit, Standard search
    head to meet most of measurement requirements to identify 40 mm dia. bar up to 95 mm depth
    (approx.), 8 mm dia. bar up to 70 mm depth (approx.), sensing area 120×60 mm., PC cable, Battery
    pack and charger, Shoulder strap, Earphone, Carry case and instruction manual.