• You've just added this product to the cart:

    Adjustable Steam

    Adjustable Steam

    This equipment is used to monitor the swelling by placing it on top of the soil sample. The swell test
    consists of perforated plate (swell plate) with adjustable stem, dial gauge and dial gauge tripod for
    mounting swell dial gauge in position on CBR Mould Collar.

  • You've just added this product to the cart:

    Augers Power Head

    Augers Power Head

    Used in conjunction with sampling tubes to obtain disturbed or
    undisturbed soil samples. 47.7 cc displacement, 40:1 reduction ratio,
    80-100-150-200 mm bit diameter. The Auger should be ordered
    separately.

  • You've just added this product to the cart:

    Automatic CBR Test Machine

    Automatic CBR Test Machine

    The SCTS-0860 Automatic CBR Test Machine is designed for
    performing laboratory evaluation of the CBR value of highway subbases
    and sub-grade, and determination of the strength of cohesive
    materials which have maximum particle sizes less than 19 mm (3/4”).
    The SCTS-0860 is composed of a robust and compact two column
    frame with adjustable upper crossbeam driven by an electromechanical ram with a maximum
    capacity of 50 kN and a data acquisition and processing system.
    The SCTS-0860 is designed to load the penetration piston into the soil sample at a constant rate to
    measure the applied load and piston penetration at predetermined intervals. The ram speed can be
    set between 0.5 mm/min to 5 mm/min by using the Digital Readout Unit. This main feature allows
    the user to perform tests complying to BS, EN, ASTM or AASHTO standards with the same machine.
    Rapid adjustment of the platen is also provided by up and down buttons which are located on the
    front panel of the machine. The SCTS-0860 is supplied complete with a 50 kN load cell, penetration
    piston, linear potentiometric displacement transducer (25 mm x 0.001 mm), computer software and
    connection cable. PC is optional.

  • You've just added this product to the cart:

    Automatic Direct / Residual Shear Test Machine

    Automatic Direct / Residual Shear Test Machine

    The test covers the determination of consolidated drained shear strength of a soil material in direct
    shear. SCTS-2060 Automatic Direct / Residual Shear Test Machine is motorized and floor mounted.
    Supplied with carriage assembly load hanger and integral 9:1, 10:1 and 11:1 lever loading device as
    standard. The beam loading device which is used to amplify the vertical load on the shear box
    assembly can receive up to 50 kg of weight. The total load on the specimen can reach up to 5 kN
    (5000 N).
    The machine accepts 60 mm square, 100 mm square, 60 mm dia. round, 100 mm dia. round and 2.5
    inc. dia. round shear box assemblies. All shear box assemblies are designed to contain water that
    surrounds the specimen. The Assemblies consist of a shear box with a rigid wall square or round hole
    complete with a vertical loading pad grooved back face, a grooved retaining plate, 2 pcs. porous
    plates, 2 pcs. plane grids and 2 pcs. perforated grids.

    The shear machine is driven by high resolution servomotor and gear box assembly. Speed range is
    fully stepless variable over the range 0.00001 to 9.99999 mm/min for both direction( forward and
    reverse). After test the reverse speed is 10 mm/min.). 5 kN load cell is used for load measurement.
    10 x 0.001 mm and 25 x 0.001 mm sensitivity linear potentiometric transducers are used for vertical
    and horizontal displacement measurements respectively. Displacement limits are controlled by limit
    switch.

  • You've just added this product to the cart:

    Automatic Soil Compactor

    Automatic Soil Compactor

    SCTS-0620 Automatic Soil Compactor is designed to compact specimens automatically and uniformly,
    assuring conformity with the above listed international standards.
    The principle of the design is to allow the hammer to drop the required height into the soil in the
    mould which rotates circularly to distribute the blows uniformly over the surface of the specimen in
    the mould. The drop height is adjustable to 300 mm, 305 mm, 450 mm and 457 mm. The rammer is
    circular faced and interchangeable to 50 mm or 50.8 mm diameter. Rammer weight is adjustable to
    2.5 kg or 4.5 kg according to reference standard. When compacting 100 mm diameter specimens the
    unit operates on a single radius and when compacting 150 mm diameter specimens the unit operates
    on iner and outer radius to obtain even compaction.
    The number of blows per layer can be set at the beginning of the compaction process by the digital
    counter according to the standard preferred by user. This automatic blow pattern ensures effective
    and equal compaction for each layer of soil by rotating the base table, so the mould, in equal steps
    and travelling the rammer across the mould. User defined blow number and in-out distribution is
    also available.
    Compactor is equipped with programmable digital counter which allows the machine;
    • To select reference standard (number of blows and mould size) by the operator at
    the beginning of the test.
    • To set desired compaction cycle (number of blows and count of the number of inner and
    outer drops) by user

  • You've just added this product to the cart:

    Automatic Soil Compactor

    Automatic Soil Compactor

    The SCTS-0626 Automatic Mechanical Compactor is designed to perform fast and accurate
    compaction of soil samples automatically acc. to ASTM and AASHTO standards. For standard or
    modified compaction tests with 5.5 lb. hammer with 12” (305 mm) height of drop or 10 lb. hammer
    with 18” (457 mm) drop. Compactor accommodates 4” (102 mm) or 6” (152 mm) I.D. moulds, 4” (102
    mm) round hammer or 6” (152 mm) pie-shaped hammer compensate for sample drop during
    compaction. The total weight of the hammer is concentrated at the foot in order to provide a freefall
    action. Hammers can easily be replaced from the front side of the compactor.
    Machine stops automatically after preset number of blows per compaction is completed. Compaction
    mould is mounted on the round base; the circular base indexes automatically with each blow to
    ensure uniform sample compaction. A pie-shaped compactor foot is used with 6” (152 mm) dia.
    moulds to completely cover the surface of the sample.

  • You've just added this product to the cart:

    Balloon Density Apparatus

    Balloon Density Apparatus

    SCTS-0990 (1600 ml) and SCTS-0992 (3000 ml) Balloon
    Density Apparatus are used for the on-site determination of
    the density of well bonded soil according to the ASTM and
    French standards respectively.
    SCTS-0990 consists of a graduated cylinder of 1596 ml
    capacity housed inside an aluminium guard, a reversible
    rubber aspirator pump, a density plate 9 inches square, and
    12 rubber balloons. The principle of operation is similar to the sand replacement but the hole is filled
    by a rubber balloon where water is pumped. The amount of water can be easily determined by the
    graduation of the cylinder.
    The capacity of SCTS-0992 apparatus is 3000 ml. A metal cylinder is filled with water which is then
    pumped into a rubber membrane mounted on the base of the cylinder. The water pressure is
    controlled by a pressure gauge and the volume of the balloon is measured on the graduated piston
    stem.

  • You've just added this product to the cart:

    CBR & MOULD ACCESSORIES EN

    CBR & MOULD ACCESSORIES EN

    Product Code
    CBR Mould and Accessories EN

    Standards
    EN 13286-47

  • You've just added this product to the cart:

    CBR Mould and Accessories BS

    CBR Mould and Accessories BS

    Product Code
    CBR Mould and Accessories BS

     

    Standards
    BS 1377:4, 1924:2; EN 13286-4

  • You've just added this product to the cart:

    CBR Test Machine

    CBR Test Machine

    The SCTS-0852 is designed for performing laboratory evaluation of the
    CBR value of highway sub bases and subgrade and for the
    determination of strength of cohesive materials which have maximum
    particle sizes less than 19 mm (3/4”).
    The SCTS-0852 is designed to load the penetration piston into the soil
    sample at a constant rate to measure the applied load and piston
    penetration at predetermined intervals.
    The machine is designed to be mounted on a suitable bench and comprises of a robust and compact
    two column frame with adjustable upper cross beam. The frame has 50 kN capacity. Two test speeds
    are provided 1.0 mm/min for BS and 1.27 mm/min. for ASTM/EN/AASHTO tests. This main feature
    allows the user to perform tests complying to BS or ASTM/EN/AASHTO standards with the same
    machine. Loading and unloading are down from the front panel by UP/DOWN buttons. Unloading
    speed is adjusted 5 mm/min for easy re-testing.

  • You've just added this product to the cart:

    CBR Test Machine with Digital Readout Unit

    CBR Test Machine with Digital Readout Unit

    The SCTS-0854 is designed for performing laboratory evaluation of
    the CBR value of highway subbases and subgrade and for the
    determination of strength of cohesive materials which have
    maximum particle sizes less than 19 mm (3/4”).
    The SCTS-0854 is designed to load the penetration piston into the
    soil sample at a constant rate to measure the applied load and
    piston penetration at predetermined intervals. The Machine has 2
    digital readout units for load and displacement.
    The machine is designed to be mounted on a suitable bench and comprises of a robust and compact
    two column frame with adjustable upper cross beam. The frame is 50 kN capacity. Two test speeds
    are provided 1.0 mm/min for BS and 1.27 mm/min. for ASTM/EN/AASHTO tests. This main feature
    allows the user to perform tests complying to BS or ASTM/EN/AASHTO standards with the same
    machine. Loading and unloading are down from the front panel by UP/DOWN buttons. Unloading
    speed is adjusted 5 mm/min for easy re-testing.

  • You've just added this product to the cart:

    COMPACTED ROAD BASE & SUBBASE SOILS

    COMPACTED ROAD BASE & SUBBASE SOILS