Automatic 500 kN Tension and 1000 kN Compression Testing Machine
SCTM-3000 automatic 500 kN tension and 1000 kN compression testing machine has been designed
to meet the need for reliable and consistent tensile testing of steel rebars up to 22 mm diameter and
compression testing of concrete cube samples up to 150 mm and cylinders up to 160×320 mm.
This lightweight low cost and high accurate machine is suitable for use both in the site testing and
educational purposes. SCTM-3000 feature the complete automatic test cycle with a closed loop
digital readout. Once the specimen parameters have been introduced, it is sufficient to press the
START button to complete the test.
SCTM-3000 tension/compression test machines consist of three main parts: Frame, power pack and
data acquisition & control system. On the measuring system pressure transducer is used for load
measurements and Linear Potentiometric Displacement Transducers is used for strain
measurements. Each part has been designed to manufacture machines with a high degree of
mechanical stability and complies to BS 1610, ASTM C-39, E4 AASHTO T-22, NF P18-411, DIN 51220
(with suitable platen set) standards.
The load frame is a welded steel fabrication carrying the ball-seated upper platen or the universal
grip assembly. Positively located on the loading ram which is protected from debris by a cover, the
lower platen is marked for the centering of cube and cylinder specimens. The dimensions of the
frame allow the tension tests on steel rebar up to 22 mm dia., and flat specimens up to 15mm thick
and 50mm wide, compression tests on concrete cylinders up to 320 mm long x 160 mm diameter and
cubes up to 150 mm. The machine is supplied complete with 5 pcs. 90 mm x Ø165, 2 pcs. 50 mm x
Ø165 and 2 pcs. 30 mm x Ø165 distance pieces. To test samples shorter than 150 mm extra distance
pieces should be ordered. The frame have a double acting piston with over travel protection to
stop the motor when the maximum platen or grip travel be reached
Cold Test Bending System
SCTM-8400 Cold Bending Machine is used
for bending and re-bending tests of
reinforcing bars, wire rod and wire for
concrete in accordance with the
requirements of EN ISO 15630-1.
The test piece is bent over a mandrel. The
angle of bend and the diameter of the mandrel (D) is selected in accordance with the relevant
product standard EN 10080.
The bend test is performed with a minimum angle of bend of 180° over a mandrel. according to EN
For re-bend test, first the test piece is bend with a minimum angle of bend of 90° over a mandrel, in a
second step, the aging treatment is applied and than the test pieces bent back up to a minimum of
20°.according to EN ISO 15630-1,
After the tests, the tension (lower) side of the test piece is visually inspected for cracks or fissure
visible to a person with normal or corrected vision. .
The test piece is inspected for cracks and fissures visible to a person with normal or corrected vision.
Electromechanical Universal Test Machine SCTM-8010
SCTM-8010, 50 kN capacity Servo Controlled Wide Test Space Electromechanical Universal Testing
Machine is fully automatic and multipurpose versatile machine which satisfy the requirement of R&D
laboratories, university laboratories, institute laboratories and quality control laboratories.
The Machine is equipped with a servo motor and TFT Graphics Data Acquisition and Control Unit.
Flexural , breaking, bending, tensile, compression strength, tensile adhesion and tensile bond
strength, CBR, Marshall, tensile and weld shear force tests can be perform under load or
displacement control by using suitable accessories up to the machine capacity on wide range of
materials, such as ceramic and terrazo tiles, naturel stone, adhesives for tiles, grouts for tiles clay
and concrete roofing tiles, glass-fibre reinforced precast concrete products, thermal insulating
products, plastering mortars, products for the protection and repair of concrete structure, soil and
bituminous mixtures and welded fabric steel for the reinforcement of concrete.
The Testing Machine consist of base containing the transmission components and holds two robust
columns connected by upper cross head and digital graphics data acquisition and control system. The
upper cross head can be adjusted to set the vertical test space for different tests.
User can adjust the vertical test space by also lower crosshead moved by an electromechanical
system with a single re-circulating ball screw, powered by an servomotor. Advanced closed loop
control system assures accurate load or displacement pace rate on sample.
The load is measured by a load cell that located on upper crosshead and displacement is measured
by displacement transducer fitted to the lower crosshead. The operator will have large flexibility
during the test with advanced microprocessor control and material testing software installed on PC.
Suitable accessories and different capacity loadcells should be ordered separately acc.to the test
Electromechanical Universal Test Machine SCTM-8050
SCTM-8050, 50 kN and SCTM-8300, 300 kN capacity fully automatic Electromechanical Universal Testing Machines are multipurpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. UTM 8050 and SCTM- 8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories.
These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor. Advanced closed loop control system assures accurate load or displacement pace rate on sample. The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models. The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC. The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.
Hydraulic Universal Testing Machine
SCTM 4000 Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for
structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test
Machines can also be used for compression tests up to the capacity of the machine.
Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the
lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently. 0-40 mm flat and 8-32 mm round samples can be tested with a user friendly hydraulic
jaws that comply with standards.
Load cell is used for load measurements. Strain measurement is done by the electronic displacement
transducer built in the machine if required external extensometer fitted to the specimen also can be
used for strain measurement. Strain measurements can be done directly from the extensometer
fitted to the specimen.
Tests can be done fully automatic by digital control unit or computer. Machine complete the test
with the set pace rate and turns to start position automatically.
SCTM-4000 Hydraulic Universal Testing Machine, features two test spaces for tension tests and
compression tests. User can quickly change between tension and compression testing without having
to remove heavy fixtures. This flexible design also helps to ensure safety, reduces operator effort and
The distance between the grips can be set by motor driven hand set system. With open front
hydraulic wedge grips user can load specimen easily.
Motorized Pendulum Impact Tester
SCTCI-0150 motorized pendulum impact tester is high performance device and ideal for testing
metals to Charpy and Izod standards at capacity of 150 Joules. Constructed with solid steel frames,
motorized pendulum impact testers are machines that you can trust and is safe, quick and easy to
operate. It can be fitted with accessories for Charpy and Izod Tests. Each test requires a specific
vice/fixture, specimen adapters, and hammers. Operation of the machine is controlled and test
results are collected by using colored touch screen digital control unit. Test results such as energy
absorbed calculated and displayed on the control unit.
With SCTCI-0150 motorized pendulum impact tester, after the test, the pendulum is automatically
captured and returned to the starting position. This feature enables the starting angle setting to be
varied and optimum test parameters such as impact speed and energy loss on impact to be
Universities, laboratories of the institutions, automotive and aero companies, research and R&D
Labs, as well as steel plants are typical customers for these kinds of testing systems.
Multiplex Machine is used to make Uniaxial, CBR and Marshall Tests. 50
kN capacity Multiplex Machine is equipped with a servo motor and
graphics data acquisition and control system and capable of doing test
with the speed range of 0,00001 mm/min to 51 mm/min suitable for
CBR, Marshall, Triaxial and Uniaxial Tests and similar tests with
appropriate accessories. SCTM-0108 Multiplex Machine is composed by
a robust and compact two column frame with adjustable upper cross
Multiplex Machine with Servo Motor
Multiplex Machine is used to make Uniaxial, CBR and Marshall Tests.
100 kN capacity Multiplex Machine is equipped with a servo motor and
TFT graphics data acquisition and control system and capable of doing
test with the displacement speed range of 0,00001 mm/min to 51
mm/min suitable for CBR, Marshall, Triaxial and Uniaxial Tests and
similar tests with appropriate accessories. SCTM-0109 Multiplex
Machine is composed by a robust and compact two column frame with
adjustable upper cross beam.
servo hydraulic universal testing machine
SCTM-6000, SCTM-7000 and SCTM-8000 computer controlled servo hydraulic universal testing machines
are suitable to test various metallic and non-metallic materials and can carry out tension, compression,
flexural and bending tests. The capacity of SCTM-6000 is 600kN, of SCTM-7000 is 1000kN and SCTM-8000
is 2000kN. On all models load cell is used for load measurement to achieve best load accuracy during test.
The load accuracy of the systems is ±1% down to 2% of the full capacity. Strain measurements are done
by the electronic displacement transducers built in the machine. Displacement or strain measurement can be also done external extensometer fitted to the specimen. The accuracy of the strain measurement
on frame is 12.5 microns.
SCTM-6000, SCTM-7000 and SCTM-8000 systems are guaranteed to meet EN ISO 6892-1, EN ISO 15630-1,
EN ISO 7500-1, ISO 679, ISO 1920-4, ASTM E 290 and other international and national standards. Servo
hydraulic universal testing systems can carry out tension test, compression test, bend test and flexure
test by two pace rate type including load control and displacement control . Those two control
parameters can be switched during the test. According to the preset condition, the systems can realize
constant-rate loading, loading according to preset curve, testing with constant-rate displacement.
With powerful testing software, SCTM-6000, SCTM-7000 and SCTM-8000 systems can acquire, dispose
automatically testing data, display real-timely stress-strain curve, load-deformation curve, load-time
curve and other related curves, at the same time, can save, output, print test report and data with
customized format. With the help of advanced Material Testing Software the machine can be widely used
in ultimate R&D department, Universities and Academies, Quality control and Inspection department,
calibration centers/laboratories and industry.
Servo-Hydraulic Universal Testing Machine
S Series Universal Testing Machines are high capacity
systems with single test space and suitable for
tensile, compression, flexure tests on a wide range of
different materials such as round, flat and profile
specimens for quality control, product development,
research or process development. Testing systems
for brittle materials such steel or fasteners requires high stiffness load frames that minimize the
amount of deformation energy that is stored in the frame.
Servo-Hydraulic Universal Testing Machines can be controlled via. Multifunctional Remote Control
Hand Set that is located on the frame, Digital Control Unit or Material Testing Program (MTP)
software that installed on the PC connected to the Control Unit.
Servo-Hydraulic Universal Testing Machine can carry out tensile and yield, compression, flexure tests
with load and displacement controls. S Series can be switched between load and displacement
control during the test.
UTM Machine is used to make Uniaxial, CBR and Marshall Tests. 50 kN capacity UTM Machine is
equipped with a servo motor and LCD graphics control system and
capable of doing test with the speed range of 0,00001 mm/min to 51
mm/min suitable for CBR, Marshall, Triaxial and Uniaxial Tests.
For analog measurement the frame can be completed with load ring and
dial gauge. Load ring and dial gauge should be ordered separately.
If the machine will be used with a data logger, unilogger (SCTG0325),load
cell and displacement transducers should be ordered to
complete the testing machine.
The tests such as Uniaxial, Triaxial, Marshall and CBR can be performed
with the SCTM-0107 by adding the test accessories. Test accessories
should be ordered separately according to the tests.
Wide Test Space Electromechanical Universal Test Machine
SCTM-8020, 10 kN Capacity Electromechanical
Universal Testing Machines are multipurpose
versatile machine. Used for flexural breakıng load
and modulus of rupture tests of ceramic floor and
wall tiles and breaking strength test of clay or
concrete roofing tile, terrazo tiles and also for tensile
adhesion and tensile bond strength tests of
adhesives for tiles, mortar for masonry and products for the protection and repair of concrete
structures under load control by using suitable accessories up to the machine capacity.
The Testing Machine consist of base containing the transmission components and holds two robust
columns connected by upper cross head and LPI Battery Operated Digital Readout Unit. The upper
cross head can be adjusted to set the vertical test space for different tests. The load is measured by a
load cell that located on upper crosshead. The Machine can perform test with displacement and load
- Strength of Material
- Process Control Engineering
- Telecom Trainers
- Refregeneration Engineering
- Other Trainers
- Boilers & SteamGens
- CNC Trainers
- Electronic Trainer
- Environmental Trainers
- Fluid Mechanics
- uP Trainers
- Civil Engineering Products
- About Us
- Contact Us